Quick Installation Guide
3
and then use the network cable of the 10/100BaseT to connect to the Administrator’s PC. If
it is necessary to connect the PC or wireless AP directly to the Authentication, then we need to
use the cross over line.
4.
Connect the Private LAN port.
The Private LAN port is used to connect the trustful network. In other words, the computer
connected to the Private LAN does not require to login to use the network resources. This
port can be used to connect to a Server such as Web Server or a Mail Server, etc. Use the
network cable of the 10/100BaseT to connect to the Switch or Hub of the Private LAN, and
then use the network cable of the 10/100BaseT to connect to the Administrator’s PC. If it is
necessary to connect the PC or wireless AP directly to the Private LAN, then we need to use
the cross over line.
5.
Turn on the power.
Plug the bundled power supply connector into the socket and then turn on the power.
6.
Check the LED indicating light.
After the power is on, the power indicating light should be lit. The WAN and indicating lights
should be lit when the WAN and ports are properly connected to the network equipment. The
corresponding indicating lights also should be lit when the Public LAN and Private LAN ports
are properly connected.
