
Long Range Wireless Access Point / Client Bridge
Version 1.0
6
•
802.1x IEEE 802.1x Authenticator
•
MAC address functions MAC address filter (AP mode)
•
Station isolation
Management
•
Firmware Upgrade Upgrading firmware via web browser, setting are reserved
after upgrade
•
Reset & Backup Reset to factory default. User can export all setting into a file
via WEB
•
MIB MIB I, MIB II(RFC1213)
•
SNMP V1, V2c
1.2 Package Contents
Open the package carefully, and make sure that none of the items listed below are
missing. Do not discard the packing materials, in case of return; the unit must be shipped
in its original package.
1* 802.11b/g Long range AP/CB (EOC1650)
1* PoE injector (EPE-1212)
1* Power Adaptor
1* CD with User’s Manual
1* Quick Installation Guide (QIG)
1* Metal Strap
2* Special Screw Set (Screw size : 3
φ
x 16.5mm)
1* 5dBi Dipole Antenna
2* Suction Cup
1.3 Safety Guidelines
In order to reduce the risk of fire, electric shock and injury, please adhere to the following
safety guidelines.
Carefully follow the instructions in this manual; also follow all instruction labels
on this device.
Except for the power adapter supplied, this device should not be connected to
any other adapters.
Do not spill liquid of any kind on this device.
Do not place the unit on an unstable stand or table. This unit may drop and
become damaged.
Do not place any hot devices close to this unit, as they may degrade or cause
damage to the unit.
Do not place any heavy objects on top of this unit.
Do not use liquid cleaners or aerosol cleaners. Use a soft dry cloth for cleaning.
1.4 System Requirements
The following are the minimum system requirements in order configure the device.