Switching Between Operating Modes
This device can operate in the following modes: Access Point, WDS AP, WDS Bridge and Repeater.
A.
Click on the
Operation Mode
link under the
System
navigation drop-down menu.
B.
Operating Mode
: Select an operating mode from the list (Access Point, WDS AP, WDS Bridge or
Repeater) and then click on the
Apply
button.
C.
All basic setup is completed.
Note: The wireless connection is not secure. To setup security on the
CAP7250AG/CAP7252AG/CAP7253AG, refer to the CAP7250AG/CAP7252AG/CAP7253AG User
Manual.
Mounting the CAP7250AG/CAP7252AG/CAP7253AG
Using the provided hardware, the CAP7250AG/CAP7252AG/CAP7253AG can be attached to a ceiling or
wall.
To attach the CAP7250AG/CAP7252AG/CAP7253AG to a ceiling or wall using the mounting bracket:
1)
Attach the mounting bracket to the wall or ceiling using the provided wall/ceiling mounting
hardware kit.
2)
Insert the provided short screws into the bottom cover of the
CAP7250AG/CAP7252AG/CAP7253AG.
Leave enough of the screws exposed to ensure that the unit can be attached to the mounting bracket.
If extra space is required, use the provided spacers and long screws from the T-Rail mounting
hardware kit to increase the space between the unit and the mounting bracket.
3)
Mount the CAP7250AG/CAP7252AG/CAP7253AG on the mounting bracket by rotating the unit
clockwise about 90 degrees to secure it in place.
