Quick Installation Guide
CAP7250AG/CAP7252AG/CAP7253AG
Wireless-AC+ABGN Long Range Ceiling Mount Dual Concurrent AP
Please verify contents of the box before continuing to set up the CAP7250AG/CAP7252AG/CAP7253AG.
CAP7250AG/CAP7252AG/CAP7253AG Access Point
12V/2A 100V~240V Power Adaptor
Mounting Bracket
Wall/Ceiling Mounting Hardware Kit
T-Rail Mounting Hardware Kit
*CAP7250AG is 3x3 concurrent 3x3 MIMO access point
*CAP7252AG is 2x2 MIMO internal ANT access point
*CAP7253AG is 2x2 MIMO external ANT access point
Connecting the CAP7250AG/CAP7252AG/CAP7253AG
1)
Ensure that the computer in use has an Ethernet Card (RJ-45 Ethernet Port). For more information,
verify with User Manual.
2)
Connect one end of the Category 5e Ethernet cable into RJ-45 port of the
CAP7250AG/CAP7252AG/CAP7253AG and the other end to the RJ-45 port on the computer that
will use the CAP7250AG/CAP7252AG/CAP7253AG. Ensure that the cable is securely connected to
both the CAP7250AG/CAP7252AG/CAP7253AG and the Computer.
3)
Connect the Power DC Inlet to the
DC-IN
port of the CAP7250AG/CAP7252AG/CAP7253AG and
the Power to the electrical out.
Note
: CAP7250AG/CAP7252AG/CAP7253AG supports both IEEE 802.3at PoE(Power over Ethernet) and
regular power adapter. You should use either one as the power source. Please do not apply both at the
same time.
