background image

 

 

 

 

 

 

 

 22

 

Chapter 4 Troubleshooting

 

This chapter describes the problems and corresponding solutions that may occur when

installing a PC Card.

 

 

Symptom

 

Solution

 

Windows does not

 

detect the PC Card when

 

installed.

 

Verify that the PC Card is properly

 

inserted into the PC Card slot.

 

Check whether the computer has a

 

Plug and Play BIOS.

 

Windows 98/ME/2000/XP might
not

 

detect the PC Card if a previous

 

installation of the PC Card was

 

cancelled before it was finished.
Remove the previous driver, and
redo

 

The installation again.

 

Driver fails to load

 

A resource conflict could exist.

 

For Windows 98/ME/2000, use the

Device Manager

 to resolve

resource

 

conflicts.
Select 

System

 from the 

Control

Panel

, then click on the 

Device

Manager

 tab.

 

 

 

Device conflict on a
Windows system

 

A device conflict under Windows

 

98/ME/2000 may be related to

 

the PC Card.

 

For Windows 98/ME/2000, use the
Computer properties to identify the
used I/O port addresses and IRQ

 

values.

 

 

If there is a device conflict, select
alternative settings for I/O Base
Address  or IRQ values. If you
know which device
is conflicting with the PC Card, you
have the option of changing that
device’s I/O
address or IRQ instead of changing
the PC Card.

 

 

Summary of Contents for 30V214



























Reviews: