Senal ASM-5, User Manual

Page: 9 / 16

9 Setting Up
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
You.can.adjust.the.high.frequency.(HF).by.
±
1.dB.and.the.low.
frequency.(LF).by.
±
2.dB..We.recommend.adjusting.these.to.
suit.the.listening.environment.
You.can.adjust.the.mid.frequency.(MF).by.
-2.and.-4.dB..We.recommend.adjusting.
these.to.suit.your.speaker.placement..
When.the.speaker.is.placed.on.a.stand.or.
mounted.on.a.wall,.we.recommend.setting.
the.MF.switch.to.0..When.the.speaker.is.
placed.on.a.desk.or.table.and.its.face.is.
3.1
″
.to.9.8
″
.(8.to.25.cm).from.the.edge.of.
the.desk,.we.recommend.setting.the.MF.
switch.to.-2..When.the.speaker.is.more.than.
9.8
″
.(25.cm).from.the.edge.of.the.desk,.
we.recommend.setting.the.MF.switch.to.
-4..These.measurements.are.approximate.
and.will.depend.on.your.specific.listening.
environment.
You.can.adjust.the.high-pass.(HP).filter.to.
cut.off.low.frequencies.at.55,.65,.and.75.
Hz..This.feature.is.ideal.when.matching.the.
speaker.with.a.subwoofer..When.using.the.
speaker.in.pairs,.we.recommend.setting.the.
HP.switch.to.55.Hz.
The.frequency.adjust.terminal.is.for.testing.and.adjusting.the.
curve..It.had.been.adjusted.in.an.anechoic.chamber.to.its.
optimal.position,.and.we.strongly.recommended.that.you.do.
not.adjust.this.setting.
55
65
75
HF MF LF HP
55
65
75
HF MF LF HP
55
65
75
HF MF LF HP
55
65
75
HF MF LF HP