Sena X1 PRO Manual Download Page 43

Page: 43 / 86

Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 43

5. Mobile phone usage

menU

Tap the

(+) Button

or the

(-) Button

to set

up the three available

Speed Dial Presets

You will hear the voice prompt, “

Speed

dial

” followed by the preset number.

TAP

NAVIGATE

FORWARD

ACCESS

CONFIG.

MENU

“Speed dial”

“Confi guration menu”

“Speed dial (#)”

“Save speed dial (#)”

“Cancel”

Assigning Speed Dial Presets

Navigate Forward through Preset Numbers

Navigate Backward through Preset Numbers

On Your Mobile Phone, Dial Number

Exit Menu

Dial the phone number

on your mobile phone

EXECUTE

NAVIGATE

FORWARD

NAVIGATE

BACKWARD

MOBILE

PHONE

EXIT

MENU

CONFIRM

CANCEL

10s

HOLD

On your mobile phone, call the number
to which you want to assign a

Speed

Dial Preset

. The call will be terminated

immediately. Then, you will hear the voice
prompt, “

Save speed dial (#)

.” This

confirms that the number was saved.

Summary of Contents for X1 PRO























































































Search results

Summary of Contents for X1 PRO

Reviews:

Related manuals for X1 PRO

Brands by name

Popular brands

Sena X1 PRO, Manual

Search results

Summary of Contents for X1 PRO

Reviews:

Related manuals for X1 PRO

Brands by name

Popular brands