PRISM
63
English
•
Do not cause impact to the product or touch it with sharp tools
as this may damage the product.
•
Do not use the product in high-temperatures or apply heat
to the product as this may cause damage, explosion, or fire.
•
If the camera overheats, remove the battery pack from the
main unit and allow the camera’s internal temperature to
decrease.
•
High internal temperature may result in noisy photos. This is
not a malfunction and does not affect your camera’s overall
performance.
•
Keep product away from pets or small children. They may
damage the product.
•
Do not use the product near hazardous explosives. When it is
near any explosion hazards, turn off the power and heed any
regulations, instructions, and signs in the area.
•
Do not put the product where it may hamper the user’s vision or
manipulate it while using it. This may cause traffic accidents.
•
Before using your product, fasten the product to the helmet,
and double-check that it is fastened. Separation of the product
while riding may cause damage to the product or accidents.
•
Check that the camera is operating properly in advance. Any
file loss or camera damage caused by camera malfunction or
improper use is not covered under warranty.
•
Never use a damaged memory card. This may result in
electric shock, camera malfunction, or fire.
•
If the product is damaged, stop using it immediately. It may
cause damage, explosion, or fire.
•
Be careful when using the product in wet environments when
the camera is removed from the water resistant housing. If the
product gets wet, dry it thoroughly before using it any further.
Do not attempt to dry the product with an external heat source,
such as a hair dryer. The manufacturer takes no responsibility
for any damage to the product that may have resulted from the
product coming into contact with liquid.
Battery
This product has a rechargeable battery. Therefore, when using
the product, make sure to adhere to the following:
•
Be sure to detach the battery pack from the main unit and
store it in a cool, dry place. Connected batteries can leak and
corrode over time and this can cause serious damage to your
product.
•
The battery performance may be reduced over time with
usage.
•
Make sure you turn off the product when it is not in use. The
battery discharges even when your product is in standby mode.
•
Make sure you charge the battery pack enough before using
your product.
•
When recharging the battery, make sure to use an approved
charger provided by the manufacturer. Use of a non-approved
charger may cause fire, explosion, leakage, and other hazards
may also reduce the life time or performance of the battery.
•
Any 3rd party USB charger can be used with Sena products
if the charger is approved by either the FCC, CE, IC or other
locally approved agencies that Sena accepts.
•
Store the battery at temperatures of 15°C~25°C (59°F~77°F).
Higher or lower temperatures may reduce the capacity and
life of the battery, or may cause temporary non-operation. Do
not use the product in sub-zero temperatures, because it may
cause serious reduction of the battery’s performance.
•
If you apply heat to the battery or throw it into fire, it may
explode.
•
Do not use the product with a damaged battery. It may
explode and/or cause accidents.
•
Never use a damaged charger. It may explode and/or cause
accidents.
•
Battery life may vary depending on conditions, environmental
factors, functions of the product in use, and devices used
with it.
