8
2. Getting Started
This chapter describes how to set up the Parani-SD Series for the first time.
-
2.1 Panel Layout
explains the panel layout.
-
2.2 Connecting the Hardware
describes how to connect the power, the serial device, and the battery
pack (for SD200 only) to the Parani-SD Series.
Following items are pre-required to get started.
- One DC power adapter, USB power cable or DC power cable (included in the package).
- One PC with RS232 serial port.
- Terminal emulation program running on the PC
- One battery pack and two ‘AA’ batteries (optional accessory for SD200 only)
2.1. Panel Layout
This section describes the panel layout of the Parani-SD.
Figure 2-1 The panel layout of Parani-SD100
