NP200G-Cellular
15
SENA Corporation 10606 Dallas, TX 75229, P: 972-488-8724 E: [email protected]
11)
For changing Unit setting Remotely click on hyper link “Unit Remote Commands”. You will
navigate to Unit Remote Commands Page. Figure 10. (
only Admin will have the access of
this page
)
You Can change the below fields remotely.
•
UTC Date and UTC Time
: Date should be in format YYMMDD and time should be in
format HHMMSS
•
Offset
: You can change the offset values. For example, you want to set the offset -24 so
you should have the enter 24 and if you want set +24 value should 124.
•
Individual Register Scanning
: For Scanning Only one type of registers you can press
the buttons ScanAI, ScanDI, ScanDO, ScanRH
•
Reports Alarms
: Here is you have 12 options to set report time alarms. You have to set
alarms in format HHMM. Also, if you want hourly report enter 9900 in one filed you will
get hourly reports.
•
Change Output’s:
You can change the output values by pressing available buttons.
Means if current value is ON then you can press OFF button. If current values are OFF,
then you press ON button.
Figure 9
