7
ABOUT THE +MESH
1.3 Installing the +Mesh
Install the
+Mesh
where the antenna is not blocked by the
human body as much as possible.
When the human body is blocking the antenna, the
Mesh
intercom
signal strength will be weakened.
1.3.1 Using the Handlebar Mounting Kit
1. Place the handlebar mounting kit on the handle bar, wind
the rubber band around the handle bar, and hang it on
the hook.
2. Attach the handlebar mounting kit on the back of the
main unit along the guide rail until you hear a click.
1.3.2 Placing on the Mounting Cradle
1. Locate a proper surface on your motorcycle body, clean
the body surface location with a moistened towel, and
allow to dry thoroughly.
2. Peel off the cover of the adhesive tape of the mounting
cradle and attach the unit on the proper surface of your
motorcycle.
3. Attach the mounting cradle on the back of the main unit
along the guide rail until you hear a click.
Note:
Make sure that the main unit sticks on your
motorcycle body firmly. Maximum adhesion occurs after
24 hours.
