Semtech LoRa Edge LR1110, User Manual

Page: 87 / 130

LR1110
User Manual
Rev.1.0
UM.LR1110.W.APP March 2020
87 of 130
Semtech
www.semtech.com
10.3.2 Basic Result Format
The Basic Result structure is organized as continuous series of MAC Addresses Basic Results, each MAC Address Basic Result
being coded on 9 Bytes, defined in
Table 10-2: Basic Results Format per MAC Address here below. The maximum number
of MAC Addresses reported is 32.
•
Wi-Fi Type : coded on 8 bits:

bits 0-1: Wi-Fi signal type:

1: Wi-Fi b

2: Wi-Fi g

3: Wi-Fi n

bits 2-7: DatarateID , coded as indicated in Table 10-4: Wi-Fi DatarateID Field .
•
Channel info : coded on 8 bits:

bits 0-3: ChannelID , coded as indicated in Table 10-5: Wi-Fi Channel ID Field . ChannelID indicates the Wi-Fi channels
configured for the scan.

bits 4-7: MacValidation , coded as indicated in Table 10-6: Wi-Fi MacValidation Field .
MacValidation indicates if the MAC address belongs to a gateway, to a phone or if it is undetermined because MAC address
is extracted from a packet.
• RSSI : RSSI value of the signal captured, coded on 8 bits
• MAC: MAC address of the Access Point, coded on 6 bytes:

MAC6:MAC5:MAC4:MAC3:MAC2:MAC1, from MSB to LSB
10.3.3 Full Result Format
• The Full Result structure is organized as continuous series of MAC Addresses Full Results, each MAC Address Full Result
being coded on 22 Bytes, defined in
Table 10-3: Full Results Format per MAC Address here below. The maximum
number of MAC Addresses reported is 32.
Table 10-2: Basic Results Format per MAC Address
Byte 0 1 2 3 4 5 6 7 8
Content Wi-Fi type Channel
info
RSSI MAC6 MAC5 MAC4 MAC3 MAC2 MAC1