SEMIKRON SKYPER, Technical Explanation

Page: 12 / 37

© by SEMIKRON / 2020-05-25 / Technical Explanation / SKYPER ® 12 PV
PROMGT.1026/ Rev.7/ Template Technical Explanation
Page 12/37
X10:09 PWR_VS Driver power supply Stab15V ±3%
X10:10 PWR_VS Driver power supply Stab15V ±3%
4.2.2 Pin assignment of pin header X100 | Secondary side | TOP
Table 5: SKYPER ® 12 PV | Pin assignment – Secondary side | TOP | X100
Pin Signal Function Specification
X100:01 CFG_VCE_TOP V
CE
-monitoring reference
voltage
External voltage divider needed
X100:02 VCE_IN_TOP V
CE
-monitoring input External blocking diode needed
X100:03 PWR_VS_P_TOP Power supply output,
positive voltage Equal to V
G(on)
(external buffer capacitors can be
optionally connected)
X100:04 nERR_IN_TOP External error input 15V logic inverted; 150kΩ/0.01nF (pull-up)
LOW = External error
HIGH = No external error
X100:05 TOP_ON On signal terminal for TOP
semiconductor External gate resistor needed
(under consideration of I
out(avg)
, I
out(peak)
,
V
G(on)
)
X100:06 TOP_OFF Off signal terminal for TOP
semiconductor External gate resistor needed
(under consideration of -I
out(avg)
, -I
out(peak)
,
V
G(off)
)
X100:07 CLMP_IN_TOP V
CE
-clamping input 150kΩ/0.01nF (pull-down)
In case of activated TOP_OFF:
LOW = TOP_OFF equal to V
G(off)
HIGH = TOP_OFF floating
X100:08 PWR_GND_TOP Ground potential of power
supply and digital signals Reference potential of gate voltages
(emitter/source of power semiconductor)
X100:09 TOP_SOFTOFF SoftOff signal terminal for
TOP semiconductor External gate resistor needed
X100:10 PWR_VS_N_TOP Power supply output,
negative voltage
Equal to V
G(off)
(external buffer capacitors can be
optionally connected)
4.2.3 Pin assignment of pin header X200 | Secondary side | BOT
Table 6: SKYPER ® 12 PV | Pin assignment – Secondary side
|
BOT | X200
Pin Signal Function Specification
X200:01 CFG_VCE_BOT V
CE
-monitoring reference
voltage
External voltage divider needed
X200:02 VCE_IN_BOT V
CE
-monitoring input External blocking diode needed
X200:03 PWR_VS_P_BOT Power supply output,
positive voltage
Equal to V
G(on)
(external buffer capacitors can be
optionally connected)
X200:04 nERR_IN_BOT External error input 15V logic inverted; 150kΩ/0.01nF (pull-up)
LOW = External error
HIGH = No external error
X200:05 BOT_ON On signal terminal for BOT
semiconductor External gate resistor needed
(limits under consideration of I
out(avg)
,