9
ERROR MESSAGE
Error of an initial zero range.
Make the platter empty.
This is an overload.
Refer to SPECIFICATIONS.
ECR and Remote Display(option) Connection
Disconnect the scale from AC power.
Turn over the scale.
Remove the code plate from the bottom of the scale.
Connect the interface cable to the ECR interface connector.
Connect the cable of remote display to the scale.
8
ECR Interface Connector
(25Pin D-SUB)
Remote Display Connector
(15Pin D-SUB)
OPERATIONS
Turn on the display by pressing ON switch.
OFF
When the display is not zero though there is nothing on the platter, press the
ZERO key.
Weighing & Interface
Place the commodity on the platter.
Check the weight of commodity on the weight display.
Press the SCALE key on the ECR.
SPECIFICATIONS
MODEL
CAPACITY
MEASUREMENT TYPE
DISPLAY
TEMPERATURE RANGE
POWER SOURCE
POWER CONSUMPTION
PRODUCT SIZE(mm/inch)
PRODUCT WEIGHT
AVAILABLE INTERFACE
DEVICE(ECR)
Notice: Specifications are subject to change for improvement
without notice.
PD - 1
30 lb
0.01 lb / 15 kg
5 g
60 lb
0.02 lb / 30 kg
10 g
Load Cell
LED (5 digit)
10°C
40°C (14°F
104°F)
Refer to Spec plate
APPROX. 6 W
360(W)
325(D)
120(H) / 14.2(W)
12.8(D)
4.7(H)
8.5 kg
SANYO, CASIO, ESPER, SHARP, TEC, OMRON,
NCR, IBM compatible PC using RS 232C
Summary of Contents for PD-1
Page 1: ...PD 1 ECR Interface Scale OWNER S MANUAL ...
Page 6: ...10 MEMO ...
