VT22 Operating Instructions A9341 / August 2001
2
The VT22 transmitter has two (2) connectors; a 9-Pin Micro-D electrical connector and a SMA RF
connector. The 9-Pin connector is provided for Video/Audio/Power In. The SMA connector is provided
for RF Output. Refer to Figure 2.
Figure 2
Diagram of VT22 Transmitter
3.1
Instructions
Step 1
-
Attach antenna to the RF OUTPUT (SMA Connector) of the transmitter. Be careful not to
over-torque the connectors.
Step 2
-
Attach mating connector to the 9-Pin Micro-D connector (J1). Figure 3 depicts the
connector interface diagram.
NOTE:
Mating connectors are available directly from the manufacturer or through SEMCO. Two
versions are available, one with fly-away leads and one without.
-
with leads: SEMCO P/N 127-0234, ITT Cannon P/N MDM-9SCBR
-
without leads: SEMCO P/N 127-0571, ITT Cannon P/N MDM-9PSL
9-Pin Micro-D
Connector
(J1)
SEMCO P/N:
127-0234
SMA RF
Connector
Note:
Mating 9-Pin
Connector
SEMCO P/N:
127-0571
ITT Cannon:
MDM-9PSL
