Install the darning plate. (1)
Set the machine as illustrated.
Position the work under the foot.
Place the button in the desired position and lower the foot.
Set the Pattern Selector Dial for zig-zag pattern, which should
correspond to the distance between the two holes of the button.
Turn the handwheel toward you to check if the needle goes into
the right and left hole of the button without hitting the button.
Slowly sew on the button with about 10 stitches. (2)
Bring the thread tails to the back of the work, then tie off manually.
If a shank is required, place a darning needle on top of the button
and sew. (3)
For buttons with 4 holes, sew through the front two holes first,
push the work forward and then sew through the back two holes.
Sewing on buttons
1
2
3
19
