SeMax CDM-810, User Manual

Page: 16 / 41

the AC power supply of the CDM-810 into an outlet that is
different from the computer.
•
Microwave ovens can occasionally generate interference with
the CDM-810. If the sound quality of your CDM-810 degrades
when switching on a microwave oven, move the unit further
away from the oven. You may also want to connect the unit’s
AC power supply into an outlet different from the oven.
•
DO NOT place the CDM-810 near radio transmitters (Citizen
Band radios, amateur radio, etc.). You may also want to
connect the CDM-810’s AC power supply into another outlet
that is different from the radio transmitter.
Wall Mount Installation
For the CDM-810 to be wall mounted, you must, verify that AC
power is available and/or an internal battery (optional accessory)
is installed. (Refer to the previous section titled Battery Installation
(Optional Accessory). Insure that there is enough space to install
the BNC antenna. For this installation, you will need a small,
Phillips™ head screwdriver.
1.
Locate the 4 mounting holes on the CDM-810.
2.
Align the mounting holes on the CDM-810 to those in the
desired location on the wall. Using the provided screws,
tighten the unit securely to the wall.
CAUTION: Do not use screws other than those provided with
your CDM-810. If you lose the provided screws, you may substi-
tute two M6, self-tapping Phillips™ head screws of 20mm
lengths maximum.
Installation
and
Connection