Page | 5
OPERATING INSTRUCTIONS: VSAP
The Semak Vitashake Pro mixes quickly and efficiently.
Use it to make milkshakes, thickshakes, frappes and cocktails.
1.
Before connecting to electrical outlet, wash the container and its parts, and also
wipe the mixer base with a damp cloth.
2.
Ensure the appliance is placed on a dry, stable and level surface.
3.
Ensure that the power supply is switched off before connecting to the electrical
outlet. Ensure the cord is unobstructed and not touching any hot or sharp
surfaces. Plug the appliance into a dedicated power outlet. Turn the power ON.
4.
Place ingredients in the special mixing container. Use liquid only in the mixing
container and DO NOT use the appliance to mix ice or other solids.
5.
Using the switch found on the top of the machine, switch to the desired rotor
speed: “I” position for low speed, the “II” position for high speed or “0” for Off.
6.
Insert the rotor/mixing shaft into the mixing container and set the container on its
base, pressing down to establish contact. There are three positions available to
accommodation 11-18cm glasses / cups.
7.
Select one of these positions by pressing down to engage the motor. The
appliance will continue to run as long as you continue to press down.
8.
When ingredients are mixed to desired consistency, turn the mixer OFF.
9.
Do not leave mixer unattended or leave contents in the container when not in use.
Summary of Contents for VITASHAKE PRO VSAP Series
Page 3: ...Page 3...
