SEMAK VB180, Operation And Warranty Booklet, Page: 7 / 12

Page | 7
Cleaning and Maintenance Instructions
Always unplug the Vitablend from the power source before cleaning. The unit is easiest to
clean by placing the blade under hot running water immediately after completing the
blending task and wiping the blade dry to prevent tarnishing. Do not place Vitablend in a
dishwasher or immerse in water.
Do not attempt to remove the wand or blade assembly. Clean motor/handle body by
wiping with a barely damp cloth only. Never immerse the motor end, plug or cord in water
or any other liquid. The bearing should be lubricated occasionally with a HACCP approved
food grade lubricant by placing a couple of drops at the base of the cutting unit and drive
shaft. Spin the blade to assist in the dispersion of lubricant into the bearing.
Service & Maintenance
For Service and Repair, contact Semak for your nearest Authorised Service Agent
The Foodservice Industry is deemed a hostile environment within the scope of AS/NZS
3760:2003. Semak Vitablend MUST be routinely electrically tested for compliance with this
standard if used commercially.
It is recommended that a Food Safety program such as HACCP be employed and that
routine service and repair be undertaken at the time of electrical testing to ensure the
correct operation and function of all parts. The equipment MUST be serviced annually or
sooner depending of the hostility of the environment in which it is operated.
Spare Parts
Spare Parts, exploded views and wiring diagrams are available from our webpage. Go to
www.semak.com.au and locate the appliance in the product section for the above
information.
Warranty
Model VB180 is a Commercial Grade blender suitable for light commercial and domestic
use. This product is guaranteed for 12 Months from the date of purchase against
mechanical and electrical defects. If the fault is deemed caused by MISUSE/ABUSE the
terms of the warranty are invalidated. If the product has been opened or tampered with (ie.
In an attempt to repair it) the warranty is invalidated.
All warranty repairs should be undertaken by Semak Australia.
It is against company policy to authorize warranty repairs over the phone. Service Agents
will require a work order number from Semak to conduct warranty repairs.