SEMAK HCD10, Operation And Warranty Booklet

Page: 18 / 24

To fl t the tap correctly b ack in place proceed as follows;
Note: t h e t ray ne e ds t o b e e mpti e d out a n d cleaned ev ery t i me
that the red f lo at fitted t o t he grid rise s; t hi s is t o st op llq uid
fr om leaki n g out .
lift the tray with grid and pull it outwards to remove it from lts seating;
wash the tray and grid separately with lukewarm water.;
dry all of the compon ent s;
reposition the grid on top of the tray;
fit the tray back in place and press down to secure i t to the mach ine.
Carry out the following steps:
prepare the sanitising solution
(see paragraph 7.7);
fill the bowl with the s anitising solution;
leave the solution to act for about 30 minutes;
empty out the sanitising solution from the bowl;
then rinse out the bo wl and inside surfaces thoroughly t o elim inate all resi-
dues of sanitizing solution.
SL320001846 Ed.03 - 06/2 008 - 17 EN -
Rem o ve the b owl lid from the mac hine;
Warnin g! t h e t her m ostat m u st be s et to - OFF-.
in sanitising product.
rinse thor oughly using clean water.
clean the surface using a damp cloth and/or a non-abrasive spon g e soaked
T he drip tray shou ld b e em pt i e d and cleaned dally.
hold down the button , making sure that the rod is comp letely e xtract ed;
introduce t he tap into the seat provided and push until the pushbutton re-
turns to its initial position.
7.8.3 Fitting the tap 7.10. Cleaning the drip tray
7.9. Internal sanitization
7.11. Cleaning the bowl lid
04/2010