4
3. Parts List
Materials Included
• SemaConnect Series 4 EV Home Charger
• Allen wrench
• Mounting hardware
Tools Needed
• Stud finder
• Level
• Marker
• Drill
• Measuring tape
Materials Needed
• 3/4“ Liquid Tight Flexible Metal Conduit - Hardwired Version Only
• 3/4“ Liquid Tight Flexible Metal Conduit Connector - Hardwired Version Only
4. Installation
Site Selection
The charger should be installed in a location suitable for the 25-foot output cable to extend to the electric vehicle’s
charging port and which allows sufficient space for output cable storage in the cable hanger. The top of the wall
mount bracket is recommended to be installed at a height of 50 inches above the finished floor (check local codes).
If installing the NEMA 14-50 plug version, ensure the charger location can accommodate a NEMA 14-50 receptacle.
The NEMA 14-50 receptacle should be located no less than 24-26 inches from the ground. Consideration should be
made to the NEMA 14-50 receptacle orientation (ground terminal in the upward ‘12 o’clock position’ or downward
‘6 o’clock position’). The NEMA 14-50 receptacle orientation will determine the NEMA 14-50 input cord’s installation
aesthetics.
Ensure the height of the wall mount bracket and the NEMA 14-50 receptacle are coordinated so the NEMA 14-
50 plug seats into the NEMA 14-50 receptacle without cable tension or stress. If installing the hardwired version,
ensure that the selected charger location is within reach of the site rated junction box using the supplied 3 feet of
manufactured cable.
