PRODUCT OPERATION & MAINTEANCE PROCEDURE
Model 0202 OMD
For NATIONWIDE SERVICE call (800) 225-9293
10
If the unit is not used and the LCD Interface Display is untouched for greater than 60 seconds, the
unit will go into Low Power mode and the display will revert to the SEM ‘splash’ screen with a
‘dimmed’ screen. If the unit is further untouched for several more minutes the screen will turn fully
black. In either mode the unit may be put back into Full Power mode by simply pressing anywhere on
the display.
After 500 optical discs have been run thru the unit, the user will be required to re-lubricate the cutting
heads. The Oil indicator will appear to alert the user to do so. The Oil indicator is only an alert and
can be reset simply by the user by pressing on the Oil symbol for 2-3 seconds. If the Oil indicator is
not reset, it will turn red after several more runs.
