6
508.366.1488 | www.semshred.com
1.2
Additional Safety Notes
•
Do not place the shredder on an unstable, uneven, or tilted floor. Should the shredder fall it may result
in injury.
•
Do not place objects on top of the shredder. Do not sit or stand on top of the shredder.
•
Do not place the shredder in a humid or dusty area. Do not install the shredder near a radiator or heat
source.
•
Do not use water to clean the shredder. Use a dry cloth – see page 14 section 4.
•
Do not use polishing compounds, cleaners, petroleum-based products, or aerosols of any kind on or
near the shredder at any time.
•
Always unplug the shredder before attempting to move the unit.
•
After using the shredder remember to turn off the breaker switch. If it is not used for an extended
period of time, disconnect the plug from the outlet.
•
Do not pull on the power cord when unplugging the machine. Disconnect from the plug.
1.3
About Your Shredder
The IDShred65 is a 120V cross cut shredder that is 37ʺ x 19.75ʺ x 20.75ʺ (W x D x H) and weighs 196lbs. It is
capable of shredding dog tags and both plastic and metal credit cards with RFID chips through a 2.25”x.15” feed
chute to a final particle size of 4mm x 40mm.
1.4
Installation
1.)
When installing the shredder, keep the unit away from heat sources such as radiators and heating ducts.
Ensure that the floor is both level and stable.
2.)
When placing the shredder in its location, lock the two front casters. The caster lock is unlocked in the
up position and locked in the down position. Be sure to unlock the casters before trying to move.
3.)
Connect the power supply cord to a dedicated building outlet. Handle the power supply cord with care.
4.)
Line a plastic bag firmly inside the waste basket in the inside of the cabinet for easy disposal of chips.
SEM recommends using two bags when shredding heavy material to prevent tearing in a single bag.
Note:
Be sure to remove the air between the plastic bag and the basket. Leaving too much air between
the bag and the waste basket may cause the waste sensor to accidently respond.
