For NATIONWIDE SERVICE Call 1(800)225-9293
5
PRE-ASSEMBLY Cont…
Checking Rotating Direction
Operate the machine for a short time as described under “Operation”
•
The material is transported into the machine by the conveyor belt.
When the machine works in the opposite direction
As the machine is wired according to the IEC standardized rotary
field, when changing the rotary direction we recommend that this
is performed by an experienced specialist. The rotary direction may
be changed by exchanging the “L1” and “L2” connections in the plug.
Danger!
Incorrect exchange of the connections may endanger the operator.
In doubt, this work should be performed by an electrical specialist.
OPERATING
The machine will only run when door is closed!
Danger!
The machine may only be operated by persons who have read and understand the operating
instructions!
Keep hands away from running shredding mechanism!
The shredding mechanism may cause serious injury!
Operating Elements
1.
Start
2.
Stop and pilot light for door open
3.
Reverse and the lamp waste bin full
4.
Key switch
5.
Standby
6.
Main switch (can also be used as emergency off button)
7.
Plot light temperature indicator
8.
Emergency off
