background image

Model 0200 – POP-0120 Rev 0 

508.366.1488 | www.semshred.com 

 

Safety 

 

1.

 

Read manual and adhere to all warnings and instructions. 

2.

 

Do not attempt to adjust or modify this machine. This may void your warranty or cause the unit to 
deviate from factory specifications.  

3.

 

Do not expose the unit to wet environments or those with gas in the air.  

4.

 

Use unit only for its intended purpose. 

5.

 

Only use the cord provided with the unit in an appropriate receptacle. Avoid damaging the cord. 

6.

 

Disconnect the unit from power (remove the cord from the wall and the unit) before doing any 
maintenance, clean up, or if opening the cover of the unit for any reason. 

7.

 

Allow new operators a 10-15 minute supervised break-in period.  

8.

 

Avoid hanging long dangling objects such as hair, necklaces, or ties near the unit.  

Overview & Intended Use 

 

Attractive and easy to use, the Model 0200-OMD/SSD has been evaluated by the NSA and meets the 
requirements of DIN 66399 O-6, NIST SP 800-88 Guidelines for Media Sanitization,  NSA/CSS 04-02, High 
Security Optical Media Destruction for CDs, DVDs, and Blu-ray Discs as well as solid state devices such as 
EMV credit cards, magnetic stripe cards, Common Access Cards (CAC) IDs, and SIM cards. The Model 
0200-OMD/SSD-C upgrade includes a 3-gallon vacuum which is housed inside an attractive, portable 
cabinet, making it perfect for offices.  

The Model 0200-OMD is a lower throughput version that has been evaluated by the NSA and meets the 
requirements of DIN 66399 O-6, NIST SP 800-88 Guidelines for Media Sanitization, NSA/CSS 04-02, High 
Security Optical Media Destruction for CDs only.  

Unit Size: (LxWxH, lbs.): 11.5” x 9.4” x 7.8”, 15 lbs. 

Unit Size with Cabinet: (LxWxH, lbs.): 19.5” x 18.5” x 34”, 75 lbs. 

Power Required: 110-120V AC, 60Hz, two 10 Amp outlets 

 

 

Summary of Contents for 0200 OMD










Reviews: