31
www.selwood.com
Step 13: How to Install Inserts - Clock Assembly
There is 1 Clock Set provided to be installed on the Back Wall. See Fort Guide for correct location. See below for
how to assemble and attach the Clock Set.
When installing you will need the following:
Base Clock, Clock Subset (includes minute and hour hands, clock adapter and clock screw), 2 (2717) Clock Blocks
and 4 x (S20) Wood Screws.
To assemble Clock insert the Clock Adapter from the back of the Base Clock, place the Hour Hand over the Clock
Adapter making sure they are lined up properly. Press the Minute Hand over the Hour Hand and connect with
Clock Screw.
Attach assembled Clock through panel and into each (2717) Clock Block with 4 (S20) Wood Screws.
Panel
Base Clock
Minute Hand
Hour Hand
Clock
Adapter
2717
2717
Base Clock
Clock
Screw
Inside View
Outside View
Side View
Do not over tighten screws.
S20
Summary of Contents for Mint
Page 57: ...57 www selwood com NOTES NOTES ...
Page 58: ......
