28
GB
Reset/Technical data
5. Reset
For resetting the motor please use the setting switch for electronic drives.
Both end positions have to be set, so the movement isn’t interrupted twice during
operation.
By pressing the bottom E for 1 second the drive will be put into the automatic setup
mode. Restart setting the end positions (4.4.1. to 4.4.3.).
6. Technical data
Series
Torque
Rotation
speed
Power Input
Output
1/6
6 Nm
15 Rpm
0.45 A
105 W
1/10
10 Nm
15 Rpm
0.45 A
105 W
2/7
7 Nm
17 Rpm
0.41 A
95 W
2/10
10 Nm
17 Rpm
0.45 A
105 W
2/15
15 Nm
17 Rpm
0.66 A
152 W
2/20
20 Nm
17 Rpm
0.75 A
172 W
2/30
30 Nm
17 Rpm
0.95 A
220 W
2/40
40 Nm
17 Rpm
1.50 A
345 W
2/50
50 Nm
12 Rpm
1.50 A
345 W
Not all drive types are available in all series and torques. The motors have a 3 m power
line by default.
Information for all drive types:
Nominal voltage:
230 V AC/50 Hz
Safety class:
IP 44
Operating time:
4 min.
Subject to change without prior notice!
7. General declaration of conformity
SELVE GmbH & CO. KG company, hereby declares that the SEL Plus and SES are in
conformity with the basic requirements and other relevant provisions of the Directive
73/23/EWG and 89/336/EWG. The declaration of conformity can be looked up at
www.selve.de.
Summary of Contents for SEL Plus
