Selve i-R Timer Plus, Operating Instructions Manual

Page: 70 / 172

GB
SETTING
INTERMEDIATE POSITION, VENTILATION/TILT, PROG 1 END
LIMIT
(Time/position programming)
1. You have confirmed the HOLIDAY/LIGHT SENSOR menu
levels. INTERMEDIATE POSITION will appear.
2. You can set the switching time to move to the INTERMEDIATE
POSITION using the +/- button. The switching time is indicated
in a few seconds or you can move to the INTERMEDIATE
POSITION from the upper end limit using the DOWN/UP button.
3. Confirm by pressing OK.
4. You can set the switching time to move to VENTILATION/TILT
using the +/- button. The switching time is indicated in a few
seconds or you can move to the VENTILATION/TILT from the
lower end limit using the UP/DOWN button.
Confirm by pressing OK.
5. You have confirmed the VENTILATION/TILT menu level.
PROG 1 END LIMIT/PROG 1 INTERMEDIATE POSITION or
PROG 1 VENTILATION/TILT will appear.
6. You can select PROG 1 END LIMIT, PROG 1 INTERMEDIATE
POSITION and PROG 1 VENTILATION/TILT using the
+/- button.
7. Confirm your selection by pressing OK.
8. The function PROG 1 END LIMIT has now been set.
Please read on for further programming options using the
SETTING menu.
Programming
70
continuing
next page
Con-
tinuation
PROG 1
END POSITION
VENTILATION
(TILT)
INTERMEDIATE
POSITION
+/- +/-
OK OK OK
PROG 1
INTERMEDIATE
POSITION
+/-
+/-
PROG 1
VENTILATION
(TILT)
OK
OK