SELVA MARINE Kingfish 25, Service Manual

Page: 40 / 398

1-20
1
Bracket unit technical data
PTT system
Pinion shim (T3) mm
0.7, 1.0, 1.1, 1.2, 1.3, 1.4, 1.5,
1.6
0.10, 0.12,
0.15, 0.18,
0.30, 0.40,
0.50
Forward gear shim (T1) mm 1.0, 1.1, 1.2, 1.3, 1.4
0.10, 0.12,
0.15, 0.18,
0.30, 0.40,
0.50
Reverse gear shim (T2) mm 1.0, 1.1, 1.2, 1.3
0.10, 0.12,
0.15, 0.18,
0.30, 0.40,
0.50
Propeller shaft
Runout mm (in) 0.02 (0.0008)
Drive shaft
Runout mm (in) 0.5 (0.0197) 1.0 (0.0394)
(*1) Figures obtained using the special service tools.
Item Unit
Model
STD
Motor brush
Standard length mm (in) — 7.5 (0.30)
Wear limit mm (in) — 5.1 (0.20)
Motor commutator
Standard diameter mm (in) — 16.3 (0.64)
Wear limit mm (in) — 14.9 (0.59)
Standard undercut mm (in) — 1.3 (0.05)
Wear limit mm (in) — 0.6 (0.02)
Item Unit
Model
E.ST. E.ST.PT.
Motor brush
Standard length mm (in) — 7.5 (0.30)
Wear limit mm (in) — 5.1 (0.20)
Motor commutator
Standard diameter mm (in) — 16.3 (0.64)
Wear limit mm (in) — 14.9 (0.59)
Standard undercut mm (in) — 1.3 (0.05)
Wear limit mm (in) — 0.6 (0.02)
Item Unit
Model
E.ST. E.ST.PT.
Power unit technical data / Lower unit technical data / Bracket unit technical data