Seltron ZCE6 Basic, Manual

Page: 37 / 40

English 37
ERROR DESCRIPTION
Signalisation Error
On the home screen, the LED
light exhibits short or long
flashes to show the zone oper -
ation.
Error in connection to the room unit.
What can I do?
For the wired connection, check the connec -
tion on the room unit and the controller. For
the wireless connection, check the antenna
connection on the controller.
If the error is not resolved, the room unit and
the controller must be serviced.
The operation will automatically be adjusted as
follows:
After the configured time, the controller switch -
es to the so-called emergency operation.
On the home screen, the LED
MASTER light on the master
controller exhibits long flashes.
Error in connection with slave controllers.
What can I do?
Check the cable connection to BUS connection
on master and slave controllers. If the error is
not resolved, the controllers must be serviced.
The operation will automatically be adjusted as
follows:
The master controller operates undisturbed,
while the slave controllers operate without the
data from the master controller.
On the home screen, the LED
MASTER light flashes every 2
seconds on the slave control-
ler.
Error in connection with the master control-
ler.
What can I do?
Check the cable connection to BUS connection
on master and slave controllers. If the error is
not resolved, the controllers must be serviced.
The operation will automatically be adjusted as
follows:
The master controller operates undisturbed,
while the slave controllers operate without the
data from the master controller.