│
4
RCD2 ROOM UNIT - www.regulus.eu
4. Description, Control
1.
LCD display
2.
Increase of value / move to the next value
Pressing for 10 s unlocks or locks the setting - see parameter S1.9.
3.
Browsing the measured values
Press for 2 seconds to change the parameters listed in the table at the end of the
manual.
4.
Ambient light sensor
5.
Switching heating mode on/off
Pressing for 2 s turns the heating off or on.
Pressing for 20 s switches between heating and cooling.
6.
Decrease of value / step back
Pressing for 10 s unlocks or locks the keypad - see parameter S1.10.
7.
Switching PARTY mode On/Off
Temporarily increased temperature until the set time.
When the button is held for 10 s, the fireplace function is activated and the room
temperature is ignored for the time set in parameter S1.13.
8.
Switching ECO mode On/Off
Temporarily reduced temperature until the set time.
When the button is held down for 20 s, the device switches to holiday mode.
9.
Activation of one-time hot water heating and Switching On/Off hot
water mode.
Setting the desired day and night temperature and hot water temperature is only possible in
heating mode, if the PAIRS, ECO or HOLIDAY modes are not active.
