Seltron GWD2 Instructions For Installation Manual Download Page 12 | Manualshive

Page: 12 / 20

Seltron GWD2 Instructions For Installation Manual Download Page 12

12

Instructions for installation

Electrical connection of devices shall be done by a qualified technician or

an authorised organisation.

Prior to any intervention into the wiring, make sure that the main switch is swit-

ched off. Low voltage installation regulations IEC 60364 and VDE 0100, statuto-

ry provisions for accident prevention, statutory provisions for environmental

protection and other national rules shall be observed.

Before you open the housing, make sure that

all poles of electrical supply

had been disconnected

.

Failure to follow these instructions can lead to serious injuries, such as

burns or even threat to human life.

GWD ELECTRICAL CONNECTION

GWD INSTALLATION

The GWD module must be installed in an indoor and dry area. Avoid immediate proximity

of strong electromagnetic field sources. Choose the installation site so that the GWD is

within the range of the Wi-Fi router's wireless network.

INSTRUCTIONS FOR INSTALLATION

«
...
10
11
12
13
14
...
»

Summary of Contents for GWD2





















Reviews:

No comments