SELTEKA IF-442HD Wi-Fi Manual Download Page 5 | Manualshive

Page: 5 / 29

SELTEKA IF-442HD Wi-Fi Manual Download Page 5

5

6. Installation

Please read this manual before installing the receiver

The receivers must be placed close to a TV set or any other domestic devices in order to connect them together
through cables included in the complement. The following important rules and safety requirements must be
followed.
- the receiver cannot be placed close to devices emitting radio waves, for instance, mobile phones.
- the receivers must be directly visible by user to control it by means of the remote control.
- never connect or disconnect HDMI, AV and Ethernet cables when power is switched on.

7. Connection of the Receiver to TV Set, IPTV network, Video Player or DVD

7.1. Connection of the receiver to a TV set and IPTV network

Fig. 4 Connection of the receiver to a TV set through SCART-RCA-AV adapter or HDMI cable and IPTV

network

External power supply connection to Digital receiver

Connect complement external power supply plug to the Digital receivers power connect. Use only complement
external power supply.

Connecting Standard definition (SD) signal to analogue TV set

Connect  SCART  connector  of  SCART-RCA  cable  to  a  TV  set,  RCA  connectors  connect  to  AV  adapter  RCA
connectors and TRRS  connector connect to a digital TV receiver as shown in Fig. 4 Connection of the receiver
to  a  TV  set  through  SCART-RCA-AV  adapter  or  HDMI  cable  and  IPTV  network.  In  setting  menu  of  a  TV  set
select SCART input.

Connecting high definition (HD) signal to analogue TV set

Connect HDMI cable as shown in Fig. 4 Connection of the receiver to a TV set through SCART-RCA-AV adapter
or HDMI cable and IPTV network. Select HDMI input in your TV set menu. High definition Digital television
Picture appears in the screen. Video settings are described in detail in section 8.3.3.3. TV output settings.

Receiver connection to IPTV network

Connect IPTV networks cable as shown in Fig. 4 Connection of the receiver to a TV set through SCART-RCA-
AV adapter or HDMI cable and IPTV network. IPTV network settings are described in detail in section 8.3.3.2
8.3.3.2.

«
...
3
4
5
6
7
...
»

Summary of Contents for IF-442HD Wi-Fi






























Reviews:

No comments