
8.3.3
Dialing Centrex keys
Picks up the handset or press
SPEAKER
/ key, and then press F1 to F4
key to dial out the specific tone for some PBX services only.
8.3.4
Dialing Two-touch memory
Picks up the handset or press
SPEAKER
/ key and press MEM key and N
(N=1 ~ 9, 0, * or #).
8.3.5 Call
Time
The display shows the duration of a call in progress since a number has been
dialed out. Manual control is not available.
8.3.6 Pause
key
Press
PAUSE
key to insert a delay time of 3.6 seconds in a dialing sequence.
8.3.7 Mute
key
During phone conversation, if you do not want the person on the line to hear
your voice, press
MUTE
key to cut off the microphone. To resume
conversation, press
MUTE
key again.
8.3.8 FLASH
key
During off-hook state, press
FLASH
key for recall that is used for some PSTN
network and PBX services.
8.3.9 REDIAL
key
When the phone is off-hook, press
REDIAL
key to dial out the phone number
which was dialed out by user at the latest time.
8.3.10 In use LED
The in use LED should be turned on during the phone is off-hook.
Summary of Contents for Zenyth 650
Page 1: ...code 720142006 A0 LM ed 3 ...
Page 2: ...2 ...
Page 8: ...2006 66 EC European Directive the collection centers service must be free of charge ...
Page 19: ......