Chrono Mode
This operating mode allows the definition of a weekly program configurable for
each day of the week.To enter into this mode, press the
key until the
[Mode]
display shows the "Chrono" icon.When the Chrono mode is active, the
“On/Stand-by” LED turns amber; the “Mode” LED turns green during the “Night”
period and it turns red during the “Comfort” period.
Configuring the hours sequence:
Press the
key to start the programming procedure.
[Chrono]
a)Set the time and day of the week.
-The blinking number shows the day of the week: press
and
keys to set
[+]
[-]
the correct day, then press
to confirm.
[Mode]
-Press the
and
keys to set the hour then press [Mode] to confirm and
[+]
[-]
proceed with the configuration of the minutes. -For configuring the minutes,
repeat the same procedure and confirm with the
key at the end.
[Mode]
b)Configuring the weekly program.
The procedure starts automatically from day 1, and requires specifying the
desired temperature (either “Comfort” or “Night”) for each hour of the day. This
is done by pressing for the current hour either the
key (for setting the
[+]
“Comfort” temperature) or the
key (for setting the “Night” temperature). Once
[-]
one of the two keys is pressed, the configuration process moves to the
following hour (for a total of 24 steps).
The "Comfort" temperature is represented with a filled rectangle while the
“Night” temperature is represented with an empty space.
Example
Comfort
Night
Page 12
Selmo
Electronic
Via Pacinotti, 24 - 35030 Rubano
www.selmo.it
(PD) Italy- Tel 049.8976761, Fax 049.8976085 -
Selmo
Electronic
Via Pacinotti, 24 - 35030 Rubano
www.selmo.it
(PD) Italy- Tel 049.8976761, Fax 049.8976085 -
“SMART Plus Program ”
Electronic control for towel heaters
ENG
Comfort technology division
Selmo
Release 02 - June 2018
