SELMI Macchia, User And Service Manual

Page: 20 / 44

User and service manual
– MACCHIA – Hot chocolate dispenser 18
4. Installation section
4.1. Positioning
Warning
Before positioning the machine check that the
machine, the associated accessories and the
parts supplied separately have not been
damaged during transportation.
It is the task of the Client to make sure that the strength
of the supporting surface, at the point of installation, is
adequate for the weight of the machine.
The flooring at the point of installation must be
sufficiently level.
Isolate the machine from any potential vibrations
coming from other nearby machinery.
In the case where the machine or any of the
associated accessories are found damaged it is
important to alert the manufacturer of the found
anomaly so as to agree on the actions to be taken.
Attention
The machine must be placed on a level surface;
for
the other environmental requirements
necessary for optimal functioning of the
machine please see sections 1.11 and
2.5..
4.2. Electrical connections
Attention
The connection of the machine to the electrical
system must be carried out by personnel
observing
the legislation in force; the
characteristics of the electrical connection must
be compatible with the electrical specifications
of the machine which can be found in the
relevant section or on the apposite plaque on the
door of the electric panel.
Attention
If the machine has been purchased to be
powered by a three phase line, make sure that in
the socket there is a connection to the neutral
wire. This is necessary for the functioning of the
machine.
Attention
Before starting any procedure make sure that
there are no objects inside the tank.
4.3. Installation of the machine
After positioning the machine and connecting it to the
electrical supply, do as follows:

Clean the supplied accessories (see section 6)

Install the product dispenser (see the images
below), taking care to screw the nut all the way
in.