Power input: 5Vdc±5%,
≥
4A
UPS output: 5.1V±5% maximum 8A
UPS charging current: 3A (DC jack)
Terminal battery voltage: 4.24V
Charging threshold: 4.1V
Features
Continuous operation for up to 10~30 hours (depending on the battery type and the
amount of battery used)
Provides a maximum of 5.1V 8000mA backup power
Can work with 1/2/3/4/5/6 18650 lithium-ion batteries
Support 3A fast battery charging
Integrated battery protection circuit
Integrated over-current protection and over-voltage protection
Integrate Maxim's fuel gauge system (read battery voltage and percentage through i2c)
Intelligent automatic charging and discharging
On-board 4 green LEDs indicate battery charging and discharging levels of 25%, 50%,
75% and 100%
The on-board blue LED indicator shows the power on/off status
The on-board button can control the power on/off (short press the button-turn on, press
and hold the button for at least 3 seconds-turn off)
Power loss or power adapter fault detection (LED and GPIO indication)
On-board XH2.54 power output connector for powering other devices
Mounting holes and standoffs provide mechanical stability of Jetson Nano and T208
components
Safety Instructions and Warnings
Lithium polymer and lithium-ion batteries are very unstable. When charging or using
improperly, it may cause fire, personal injury and property damage.
When charging and discharging the battery pack, do not misconnect polarities. Always
check the polarity of the battery connector carefully to ensure "+" to "+" and "-" to "-".
Do not mix or use old and new batteries, or use other brands of batteries.
Lithium batteries have a limited cycle life. Please replace the old batteries with new
ones when they reach the end of their service life or after two years of use (whichever
comes first).
Keep UPS away from children.
Function and Assembly
Relationship between light display and power
Connect with Jetson Nano by 10Pin
