Introduction
Thank you for choosing to purchase the Selectronic LD250 TRUE SINE
WAVE inverter. Many hours of Research and Development have gone
into the LD250 to ensure this inverter provides you with many years of
reliable service
Large amounts of DC current can be drawn by your LD250,
care
must be taken.
Fixed Installation
Warranty Card
All fixed installation battery connections must be securely bolted,
using stainless steel nuts and bolts. To protect the connection from
corrosion smear a small amount of Vaseline or similar over the joint.
Never place batteries directly onto a concrete floor, place timber or
similar material beneath the batteries.
It is imperative that you complete your warranty card NOW. Your LD250
is covered by a TWO year warranty; this warranty is in addition to your
rights under the trade practices act of your state or territory.
Returning your completed warranty card will enable us to register your
warranty and avoid any possible delays should service be required. If you
have any comments about our product that will not fit on the warranty card
please feel free to drop us a line. Yes, constructive criticism will also be
welcome.
Warning
As a matter of safety, Selectronic strongly recommend that all fixed
installations be designed and installed by appropriately qualified person. The Solar
Energy Industries Association in your state or territory can provide names of accredited
system designers and installers.
All AC wiring MUST be carried out by an accredited electrician and must conform to
AS3000 and/or any relevant local standards.
The output voltage from an inverter is as lethal as mains electricity.
Installation
200mm
200mm
200mm
LD250
Inverter
Front
200mm
LD250 Inverter
Electrician’s Note
•
All earth’s AC and DC should be bonded
•
RFI/Lightning Earth stake should be within 3m of the inverter
•
The LD250 is suitable for connection to MEN wiring
•
Any AC changeover switch must be a ‘break before make’ type
Please leave a clearance of 200mm on all sides and top of the Inverter.
The LD250 must be installed in a dry, cool, dust-free environment.
It is recommended that the inverter be placed as far from any radio
receivers as possible.
Selectronic Australia
LD250 Manual
1
Selectronic Australia
LD250 Manual
2
