4
© Selecto, Inc.
CARTRIDGE CHANGE-OUT INSTRUCTIONS
Normally located at left end of the filter system.
Push until no more water comes out.
The cartridge should be twisted counter-clockwise
in relation to the bottom of the cartridge.
Be sure to properly dispose of the old cartridges (#5 recyclable).
The sanitary cap is located at the top of the new cartridge.
Lubrication is provided.
Be sure to push cartridge all the way in.
The cartridge should be twisted clockwise
in relation to the bottom of the cartridge.
Hand tight is sufficient for a proper seal.
Cartridges should be changed at least once a year, when the pres-
sure on the gauge has dropped into the red zone (less than 20 psi),
or when bad tastes and/or odors return.
1.
Shut off inlet valve
2.
Push “Red” pressure relief button to relieve pressure
3.
Grasp filter cartridge, and twist 1/8 counter-clockwise turn
4.
Pull downward about 2” to remove the filter cartridge
5.
From the new cartridge, remove and discard the “Red” sanitary cap.
6.
Be sure to apply sufficient lubrication to the O-Rings.
7.
Align the ear of the cartridge with the notch located
in the filter head. Push upwards to insert.
8.
Turn cartridge clockwise until a definite stop is felt
and the cartridge is sealed.
9.
Turn on the inlet valve. Flush newly installed filter
cartridge for 10 minutes (from sink faucet).
