Cordless Operating Instructions
HOW TO OPERATE
SPRINGDRIVE
TM
1. To lower your shade, grasp the bottom bar (handle) from the centre-point and gently pull the
shade down to desired position.
2. To raise your shade, give a slight pull on bottom bar handle, and the shade will raise automatically
in a gradual and controlled motion, stopping at the top.
FREEMOTION
TM
1. To lower your shade, grasp the bottom bar (handle) from the centre-point and gently pull the
shade down to desired position.
2. To raise your shade, using the bottom bar, gently guide the shade up to desired position.
TIPS
o Do not pull the fabric beyond the ordered height. Pulling fabric beyond your requested height will
expose the tube and could potentially damage your shade.
o To install the
bottom rail handle
, secure the bottom rail with one hand to prevent the shade from
moving. With your other hand, slowly and carefully slide the handle to the centre of the bottom rail.
o Shade
MUST
be operated from the
centre of the bottom rail
to avoid telescoping and damaging
the fabric. If applicable, please ensure the bottom rail handle is positioned in the centre of the
shade.
TIPS
o Operate the shade gradually and evenly, do not quickly force the shade up or down.
o Shade
MUST
be operated from the
centre of the bottom rail
to avoid telescoping and damaging
the fabric. If applicable, please ensure the bottom rail handle is positioned in the centre of the
shade.
o For High-Lite Shades, pull the bottom rail straight down ensuring it is not tilted forward. Rotating the
bottom rail may cause the fabric to cinch or get damaged.
o For High-Lite shades wider than 60” you SHOULD ALWAYS operate the shade with two hands to
support the bottom rail and ensure fabric isn’t creased or cinched.
CAUTION
: Do not lower the shade past the ordered length because damage may occur to the shade.
For french instructions,
scan the QR code.
Tension Adjustment
*Tension can be adjusted by rotating the dial (located on left side of shade).
• If shade is raising on its own,
loosen
the tension by turning the dial
clockwise
• If shade is lowering on its own,
increase
tension by turning the dial
counter-clockwise.
For shades installed with
reverse roll
, dial will be located on the right side of the shade.
• If shade is raising on its own,
loosen
the tension by turning the dial
counter-clockwise.
• If shade is lowering on its own,
increase
tension by turning the dial
clockwise.
Less
tension
More
tension
Regular Roll
Reverse Roll
Less
tension
More
tension
©2022 Select Blinds
How To Operate
