UP
DOWN
STOP/TILT
PAGE 1
OPTIONAL PARTS:
(supplied upon request)
Spacer Blocks
Use for shades that need more space between
the wall.
• A Shade 39” or less come with 2 brackets
• A Shade 78 3/4” or less come with 3 brackets
• A Shade greater than 78 3/4” come with 4 brackets
Your shade will come with two shims to use in case the mounting area is not level.
Place them under the higher side of the mounting area as needed to level out the area.
INCLUDED IN YOUR PACKAGE
Brackets
Quantity: Minimum 2
The wider the shade the more brackets
Screws
Quantity: 4 per bracket
Motorization Wand
Quantity: 1 per shade
Charging Brick / Micro USB
Quantity: 1 (6' cable provided) per shade
Select Motorized Dual Shade
DRILL
LEVEL
PENCIL
SCREWDRIVER
TAPE MEASURE
LADDER
1/16" drill bit,
and 1/4"
hex driver
Flat blade, Phillips, or
1/4" hex driver
THINGS TO CONSIDER BEFORE YOU
BEGIN YOUR INSTALLATION
Your new shade is custom made to your
specifications from the finest fabrics available. The
installation should be easy and your shade will look
elegant.
Mounting Options:
Inside mount:
Shade
is mounted inside to
the top of the window
frame.
Outside mount:
Shade is mounted
either on or outside the
window frame.
Mounting NOTES:
Mounting screws provided are suitable for
most mounting surfaces. See below for
additional suggestions.
For wallboard or plaster: Use hollow wall
anchors for added support.
(not included)
For concrete, stone, brick or tile: Use an
appropriate drill and appropriate anchors
before fastening the screws.
(not included)
For metal surfaces: Pre-drill holes and use
appropriate anchors before fastening the
screws.
(not included)
Motorized Wand NOTES:
Before the use of the shade, make sure the
wand is attached to the headrail. If it is not,
unpack the wand and hook onto the provided
location.
Plug the Micro USB into the port at the end of
the headrail. (see image 2 on page 3)
We suggest that you charge the shade prior
to installation.
After Installing the shade, charge via the Micro
USB port on the back of the wand for 5-7
hours for a full charge. The Wand is in charge
mode when the Light on the wand is amber.
When fully charged, the light shifts to green.
•
•
•
•
•
•
•
•
SUGGESTED TOOLS
(not included)
Summary of Contents for Dual E Series
Page 11: ...Notes ...
