SelectBlinds Dual E Series Install Manual Download Page 1

Dual 

2020.10

Motorized Dual Shade

SELECT DUAL SHADE

CONTENTS 

 

  

PAGE

Getting Started:

• Tools Needed ---------------------------  1

• Considerations Prior to Install ------  1

• Parts Included in your Package ----  1

Installation:

• Mounting the Brackets ----------------  2

• Installing the E-Series Shade ------- 2

• Installing the Motorization Wand ---  3

   

Child Safety

• Warning ----------------------------------- 4 

• Warranty ---------------------------------- 4

Questions?

 

Contact your Dealer

Operating the E-Series Shade

• Motorized Shade Introduction ------- 7

• Motorized Wand Instruction Guide - 8

Contacting Us:

Contact your Dealer regarding any question or concerns about your product.

Thank you for Choosing our Dual E-SERIES Shade for your Home or Office.

We are confident that you will find these Dual Shades to be of superior quality and value,  compared 

to other shades available. 

In this guide, you will find useful information about installation, child safety, cleaning, and warranty 

when using our shades.

READ ALL INSTALLATION INSTRUCTIONS BEFORE INSTALLATION

PLEASE KEEP FOR FUTURE REFERENCE / TROUBLESHOOTING

SEL

Summary of Contents for Dual E Series













Reviews: