SelectBlinds Banded Fabric Loop Roller Shade, Owner'S Handbook Manual

Page: 5 / 8

Banded Fabric
Loop Roller
Shade
5
window frame or wall and mark the position of the bracket (mark
the location of the screw holes) with a pencil. Insert and secure two
screws through the holes in the mounting bracket. The mounting
screws must be secured into a solid surface or wall anchors.
On inside mount shades the Tension Device may be mounted to the
side window frame or when the treatment spans beyond the window
frame it may be mounted to the wall.
Mate Tension Device To Mounting Bracket:
Once the tension device is snapped to the base it is designed not to
be removed.
Press center round button exposing the four latching legs and press
into the corresponding thru-hole of the mounting bracket stand until
the latches snap and lock to the mounting stand. The loop should
now pass freely through the Tension Device.
Step 6.
How to Operate
To raise or lower the shade, pull the lift cord.
Cleaning
To clean the shade fabric, use a feather duster or vacuum lightly
using the soft brush or upholstery attachment. For spot cleaning, use
warm (not hot!) water with a mild soap to damp clean.
REPLACEMENT PARTS
In the event that replacement parts are ever needed,
you may call: 1-800-264-1190
Please be sure to provide the following information, if possible:
•
The complete model or catalog number of your product
•
A description of the product
•
A description of the part needed