3.2 Operate a blind
Press the buttons shortly for small movements, press the buttons for 2 seconds
and the blind will move automatically. Press the stop/center button to stop the movement.
!
!
5. Set blind in BatteryMode
(Greenmode)
BatteryMode On / Off
Hold the left and right to
read out the BatteryMode
setting in the blind
BatteryMode ON:
Press
up
to put the
BatteryMode on.
To confirm:
Press center button
BatteryMode OFF:
Press
down
to put the
BatteryMode off.
BatteryMode
can be only turned
on by using
SingleSelect
method
3. Operating
3.1 Select a channel
Channel 2
Channel 1
Channel 3
Channel 4
Channel 5
Buttons
Up / tilt
Down / tilt
Left
Right
Stop
2 sec:
Favorite position
5
.2 Cleaning
Follow these general rules when cleaning the outside of the device and its components:
- Make sure the device is unplugged.
- Use a damp, soft, lint-free cloth. Avoid getting moisture in openings.
- Don’t use aerosol sprays, solvents, alcohol, or abrasives.
- Do not let children play with the blind and/or remote control
- Do not paint the device
- Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain
minerals that will corrode electronic circuits. If your device does get wet, remove the battery,
and allow the device to dry completely before replacing the battery.
- Do not drop, knock, or shake the device. Rough handling can break internal circuit boards.
Do not make repairs yourself. Do not attempt to open the device or
disassemble it. You run the risk of electric shock and voiding the limited
warranty. No user-serviceable parts are inside.
WARNING:
5.
Safety & Cleaning
5
.1 Safety
4. Remote Holder
OR
1 sec
>2 sec
1 sec
To program a blind, the blind must be in program mode. Important: BatteryMode can be only
turn on by using SingleSelect method, see chapter 2.1 how to set a blind in program mode
en exit program mode by single select.
The RF-unit in the blind forwards radio signals to increase the range of the remote.
