MANUAL DE INSTRUCCIONES
CODIGO 80307 REV A
01/2022
Pag.: 17
J
.P. SELECTA s.a.u.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
Tel 34 937 700 877 Fax 34 937 702 362
e-mail: [email protected] - website: http://www.grupo-selecta.com
7.2.3 Communication type
The equipment can store readings from time to time and send them to a
computer or store them in a USB memory pen.
«PORT»
Set the readings storing mode:
• RS232:
Send the temperature readings to a computer by a serial
cable (DB9 type).
• USB:
Store the readings in a USB memory pen drive.
«INTERVAL»
Select with
the register time interval and the
data sending.
«MODE»
Select the data to be stored:
• Start:
Save all temperature readings.
• Set point:
Save temperature readings, since the set point temperature
has been reached.
• PC:
Send data, it is not stored.
«SEND»
Number of stored data, pending from sending.
7.2.4 Set the temperature and the temperature
alarms
It is recommended to verify calibration of temperature with some regularity (for
example annually) by using for instance a termometer or a temperature pattern.
If it is necessary to correct the reading, as a result of calibration, one must
enter a correction.
To do this, press on this icon:
A box indicating the current correction value appears.
Adjust with keys
until you get the indicated value on the tempera
-
ture pattern.
Applied correction will appear in brackets.
7.2.4.1 Temperature alarms
By pressing successively on the temperature correction box, one may enter an
over-temperature and low-temperature limit. Both alarms activate a message
on screen.
7.2.5 Temperature units
Press on the Temperature units icon. Press successively to change between
Celsius or Farenheit degrees.
7.2.6 Set language
Press on the language icon. Press successively on the box to select among
Spanish, French or English.
Adjust by pressing on the Increase and Decrease icons.
CORRECT. T
(0) 176ºC
ALARM SOBRE T
0.0 ºC
ALARM BAJO T
0.0 ºC
CORRECT T
ALM UNDER T
ALM OVERT
Fig 7.2. Temperature alarms
Fig 7.2. Communication
RS232
PORT
No save
TIME
0
SEND
Start
MODE
