Select Engineered Systems Select Gate 1A, User/Installer Manual, Page: 9 / 48

SELECT GATE SG-1A V1.X
SELECT ENGINEERED SYSTEMS 11/01 5
2.0 INSTALLATION INSTRUCTIONS
NOTE THE FOLLOWING BEFORE ATTEMPTING ANY INSTALLATION:
A. Never install telephone wiring during a lightning storm.
B. Never install telephone jacks in wet locations unless the jack is specifically designed for wet
locations.
C. Never touch uninsulated telephone wires or terminals unless the telephone line has b e e n
disconnected at the network interface.
D. Use caution when installing or modifying telephone lines.
Installation of Select Gate requires co-ordination with your telephone company. It is
recommended that a Touch-Tone™ line be installed to allow much faster dialing.
The phone company may require the following information:
The ringer equivalence number.
The FCC registration number.
These numbers are on the label on the inside door of the Select Gate.
The desired location of the telephone jack must be given to the phone company at the time
the phone line is ordered, if required.
NOTE: TELEPHONE COMPANY REQUIRES ACCESS TO TELEPHONE LINE
ORIGINATION POINT. SES RECOMMENDS THAT RJ31X JACK BE
INSTALLED IN HOUSE OR MADE ACCESSIBLE TO TELEPHONE COMPANY
PERSONNEL.