Version 2: September 2004 © 2004 Selecon New Zealand Limited All Rights Reserved
ACCESSORIES
♦
Suspension Hook Clamp (Order Code: 20HC)
♦
Safety Chain (Order Code: 20SC)
♦
Lens Safety Mesh (Order Code: 20SM6)
♦
Colour Frame – the luminaire is supplied with a colour frame 184mm square. Additional colour frames are
available (Order Code: 20CFSF12).
♦
Barndoor (Order Code: 20BDSF10)
CLEANING
Open the down-swinging door, and clean the lens and/or reflector with a soft lint-free cloth.
This is the only maintenance task, which can be safely carried out by non-approved
personnel. Refer below – Safety & Maintenance note.
SAFETY & MAINTENANCE
Selecon has manufactured this luminaire in accordance with recognised best practices to recommended
international safety standards. It is your responsibility to maintain this luminaire in good and safe working
condition.
Repairs should only be carried out by suitably qualified persons. Do not operate the luminaire with cracked
lens, damaged cables etc. Consult your Selecon distributor for assistance. Only replace damaged parts with
authorised Selecon spares.
N.B. Luminaire Cable – your Selecon luminaire is fitted with a special heat-resistant, flexible cable, replace with
genuine Selecon spare part cable kit only – refer to your Selecon distributor. (Replacement cables are supplied
complete with necessary terminal connectors).
Cable Conductor colour codes: Brown
-Phase, Live
Blue
-Neutral, Return
Green/ Yellow -Earth
LIMITED WARRANTY
Selecon New Zealand Ltd. (“Selecon”) warrants its luminaires against defects in
materials or workmanship. The term of this warranty is based on the product usage
and is from the date of delivery.
Usage – Entertainment, Theatre
Term - Three Years
Entertainment, Theatre relates to the typical conditions found in a theatre performance venue viz:
4 – 6 hrs per day, six days per week.
Other – ALL Electromechanical / Electronic DevicesTerm - One Year
This warranty is void in any of the following circumstances: (a) The luminaire has been misused, neglected,
damaged or abused. (b) The luminaire has been improperly installed, operated, repaired or maintained. (c)
The luminaire has been modified. (d) The luminaire has been connected to other equipment with which it is not
compatible. (e) The luminaire has been used or stored in conditions outside its electrical or environmental
specifications. (f) The luminaire has been used for purposes other than for which it was designed. (g) The
luminaire has been used outside its stated specifications and operating parameters.
Correct installation of the luminaire is the owner’s responsibility.
To assert a warranty claim, complete Selecon’s return authorisation form (available from Selecon). Return the
luminaire to Selecon or its authorised agent.