NR-
Operation Manual
16
Fig. 10 Battery installation
9. GETTING STARTED.
Unpack
NR-T
Detector set.
Connect remote loudspeaker to the corresponding jack on the Main
unit body (see fig.2 for reference).
Install two fully charged Li-Ion Soshine
18650 cells into Detector’s battery
compartment.
Pay attention to their polarity referring the
label on the Main unit front wall.
Close the battery compartment.
Press button to switch on NR-T
Detector.
At that the following mode is activated:
-
Transmitter is OFF;
-
Receivers are ON to control noise surrounding.
-
Remote loudspeaker is coupled to the 2-nd harmonic receiver
output.
-
Input signals attenuation is in -10 dB state confirmed by
corresponding LED (pos. 9 at the fig.4);
-
Volume control is in a
Mid
-position.
