14
SEL-FT50/SEL-FR12 Fault Transmitter and Receiver System
Instruction Manual
Date Code 20210405
Safety Information
Safety Information
Regulatory Information
The SEL-FT50 and SEL-RP50 are approved for use only with specific output
power configurations that have been tested and approved. Changes or modifica-
tions to the SEL-FT50, SEL-RP50, SEL-FR12, or the antenna system, and the
power output not expressly approved by the manufacturer could void the user's
authority to operate the equipment.r The radio equipment described in this man-
ual emits radio frequency energy. Professional installation is required.
United States (FCC)
This equipment has been tested and found to comply with the limits for Class A
digital devices, pursuant to FCC Part 15 Rules. Operation is subject to the follow-
ing two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation. These limits are designed to provide reasonable pro-
tection against harmful interference when the equipment is operated in a com-
mercial environment. This equipment generates, uses, and radiates radio
frequency energy, and if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communication. Operation of
this equipment in a residential environment is likely to cause harmful interfer-
ence, in which case the user will be required to correct the interference at his/her
own expense.
Brazil
Este equipamento não tem direito à proteção contra interferência prejudicial e
não pode causar interferência em sistemas devidamente autorizados.
Este produto não é apropriado para uso em ambientes domésticos, pois poderá
causar interferências eletromagnéticas que obrigam o usuário a tomar medidas
necessárias para minimizar estas interferências.
Canada
DANGER
Install fault transmitters and
sensors in accordance with
normal safe operating
procedures. These instructions
are not intended to replace or
supersede existing safety or
operating requirements. Only
trained qualified personnel with
knowledge of high voltage
safety should install or operate
fault transmitters.
CAUTION
Although the power level is low,
concentrated energy from a
directional antenna may pose a
health hazard. Do not allow
users to come closer than 23 cm
(9 in) to the transmitter when it
is operating.
DANGER
To ensure proper safety and
operation, the equipment
ratings, installation instructions,
and operating instructions must
be checked before
commissioning or maintenance
of the equipment. The integrity
of any protective conductor
connection must be checked
before carrying out any other
actions. It is the responsibility of
the user to ensure that the
equipment is installed, operated,
and used for its intended
function in the manner specified
in this manual. If misused, any
safety protection provided by
the equipment may be impaired.
This device complies with Industry Canada
license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1)
this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause unde-
sired operation of the device.
Radio apparatus shall comply with the
requirements to include required notices or
statements to the user of equipment with each
unit of equipment model offered for sale.
Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage ;
(2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre
le fonctionnement.
Les appareils radio doivent inclure les avis ou
les déclarations à l'utilisateur de l'équipement
avec chaque unité mise en vente.
