Sel SEL-3360-2, Manual

Page: 12 / 12

12
© 2018–2021 by Schweitzer Engineering Laboratories, Inc. All rights reserved.
All brand or product names appearing in this document are the trademark or registered
trademark of their respective holders. No SEL trademarks may be used without written
permission. SEL products appearing in this document may be covered by U.S. and Foreign
patents.
Schweitzer Engineering Laboratories, Inc. reserves all rights and benefits afforded under
federal and international copyright and patent laws in its products, including without lim-
itation software, firmware, and documentation.
The information in this document is provided for informational use only and is subject to
change without notice. Schweitzer Engineering Laboratories, Inc. has approved only the
English language document.
This product is covered by the standard SEL 10-year warranty. For warranty details, visit
selinc.com or contact your customer service representative.
*PDS3360-02*
2350 NE Hopkins Court • Pullman, WA 99163-5603 U.S.A.
Tel: +1.509.332.1890 • Fax: +1.509.332.7990
selinc.com • info@selinc.com
SEL-3360-2 Data Sheet Date Code 20211229
Table 1 System Power Consumption (at 12 Vdc Input Voltage)
Power Consumption
a
a
Minimum: 0% load on all components; minimum power consumption started and idle.
Typical: 25%–50% load on all components; good indication of most application loads.
Maximum: 100% load on all components; generally cannot be reached in normal applications.
Component
Minimum Typical Maximum
Base System (E3-1505L CPU, 4 GB RAM, 1 SATA Drive): 15 W 25 W 40 W
Additional Consumption From Optional Components
SEL-9331 Power Supply (standard on SEL-3360E-2) +10 W +10 W +10 W
E3-1505M CPU: +2 W +5 W +13 W
8–64 GB RAM Configuration: +2 W +2 W +3 W
2nd SATA Drive: +1 W +2 W +3 W
SEL-3390E4 Ethernet Card +6 W +8 W +10 W
SEL-3390S8 Serial or SEL-3390T Time Card, Each: +4 W +5 W +7 W
Chipset Heater
b
cold startup (<5°C [41°F]):
continuous operation (0°C [32°F]):
continuous operation (–40°C [–40°F]):
b
Chipset heaters operate at low temperatures to keep the CPU and PCH within specified operating limits.
N/A
0 W
0 W N/A
+5 W
+20 W
+90 W
+10 W
+40 W
Table 2 Peripheral Connection Rated Current Output
Connection Current Limit
DVI-D 0.2 A, +5 Vdc, 1 W total for both
DisplayPort 0.6 A, +3.3 Vdc, 2 W
COM 1 and COM 2 0.5 A, +5 Vdc, 2.5 W each
USB Ports 2.0 A, +5 Vdc, 10 W each, 25 W all ports combined